To connect the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) to your system using self power with AC adapter, do the following:

Figure 1-1. Configuration 1: self power (AC adapter) configuration

1.Turn on your computer.

2.Connect the AC adapter to the DC IN connector1 on the USB 2.0 Super Multi-Burner Drive.

3. Using the USB cable, insert the cable plug 2 into the USB connector of the drive.

4.Plug the standard USB connector 3into the USB port of your computer.

5.Plug the power supply4 into an outlet.

Configuration 2: Connecting the drive using standard USB bus power

Requirements

vOne standard USB cable (shipped with this option).

vOne USB port (available on your system).

Specifications

Read and write of CD and DVD media are supported.

Note: Read and Write speeds are the same as with the AC adapter.

Read speeds for Configuration 2

Media

Max speed with USB Standard Bus

Disc spin method

 

Power

 

 

 

 

DVD-ROM (Single layer)

8x

CAV

 

 

 

DVD-ROM (Dual layer)

6x

CAV

 

 

 

DVD-R (4.7 GB)

8x

CAV

 

 

 

DVD-R DL

4x

CAV

 

 

 

DVD-RW (4.7 GB)

8x

CAV

 

 

 

DVD-video

4x

CAV

 

 

 

DVD-RAM (2.6 GB)

2x

ZCLV

 

 

 

DVD-RAM (4.7/9.4 GB)

5x

PCLV

 

 

 

DVD+R

8x

CAV

 

 

 

DVD+R DL

4x

CAV

 

 

 

DVD+RW (4.7 GB)

6x

CAV

 

 

 

CD-ROM

24x

CAV

 

 

 

CD-R

24x

CAV

 

 

 

Chapter 1. Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) 1-7

Page 19
Image 19
Lenovo 41N5631 manual Read and write of CD and DVD media are supported