Lenovo 70BJ9007WW manual Naming Your px4-300rNetwork Storage Array, Setting up Active Directory

Models: 70BJ9005WW 70BJ9007WW

1 165
Download 165 pages 56.13 Kb
Page 20
Image 20
Naming Your px4-300r Network Storage Array

Setting up Your px4-300r Network Storage Array

Naming Your px4-300r Network Storage Array

You can provide a meaningful name for your px4-300r using the Device Identification page. This page in the px4-300r Management Console enables you to change the Storage Device Name, the Storage Device Descriptive Name, and the Workgroup Name.

Change any of these by editing the text fields. Click Apply to save your changes.

Device Name: Enter a name for the px4-300r device. Use a name that will help you identify it on your network.

Device Descriptive Name: Enter a descriptive name for the px4-300r device. This name can provide additional detail that identifies the device. If you leave this field blank, the default device name is used.

Workgroup Name: Enter a workgroup name for the px4-300r device if you need to change the default name. The workgroup name identifies a group of computers that share information with each other. Change the workgroup name only if you explicitly define a workgroup on your network. Most users won't need to change the workgroup name, unless they have explicitly defined a different workgroup on their other computers.

Renaming the px4-300r will require a device restart.

Setting up Active Directory

If your px4-300r supports Active Directory, you configure AD on the Device Identification page. Refer to Configuring Your px4-300r for Active Directory.

10 Naming Your px4-300r Network Storage Array

Page 20
Image 20
Lenovo 70BJ9007WW, 70BJ9005WW manual Naming Your px4-300rNetwork Storage Array, Setting up Active Directory