Securing Your
Removing a User from the Group
1.Open a group to display users belonging to it.
2.To remove a user from the group, click the 
next to that user. When the Remove user
Changing Access Permissions
1.To refresh the list of users, click 
above the table.
2.Expand Access Permissions to change group permissions to a secured Share. If iSCSI is enabled, you can also change group permissions to secured iSCSI drives.
3.To add permissions to a Share, click 
Add access permissions.
4.From the Add Access Permissions
5.Click Apply to save your changes.
6.In the table listing the Shares, check Read or Write for each Share. If iSCSI is enabled, check Read or Write for each iSCSI drive. The group can have full access by checking both Read and Write. To grant only read access, check only Read.
NOTE: A group must have read access at a minimum. A group cannot have only write access.
7.Uncheck Read to remove all access to a Share and remove the Share from the table. If iSCSI is enabled, uncheck Read to remove all access to an iSCSI drive and remove the iSCSI drive from the table.
8.Click Apply to save your changes.
9.If NFS is enabled, the GID field is visible. The GID value must be the same on both the Linux client and the
Deleting Groups
To delete a group:
1.From the
2.To delete an existing group, click to expand the group.
3.In the Information section, click Delete to delete the group.
4.In the Delete Group confirmation
5.If you do not wish to delete the group, click Cancel to return to the Groups page.
79 Groups
