4.Open the retaining clips.
5.Position the memory module over the memory connector. Make sure that the notch 1 on the memory module aligns correctly with the connector key2 on the system board. Push the memory module straight down into the connector until the retaining clips close.
What to do next:
vTo work with another option, go to the appropriate section.
vTo complete the installation, go to “Closing the cover and connecting the cables” on page 39.
Installing PCI adapters
This section provides information and instructions for installing and removing PCI adapters. Your computer has a riser card with two PCI adapter connectors.
To install a PCI adapter:
1.Open the computer cover. See “Opening the cover” on page 21.
Chapter 3. Installing options 25
