Lenovo 9172 User Password, Administrator Password, Setting, changing, and deleting a password

vContain at least one alphabetic character, one numeric character, and one symbol

vContain at least one of the following symbols: , . / ` ; ' []

vYou can also use the space bar

vSetup Utility program and hard disk drive passwords are not case sensitive

vNot be your name or your user name

vNot be a common word or a common name

vBe significantly different from your previous password

User Password

When a User Password is set, the computer cannot be used until a valid password is typed from the keyboard.

Administrator Password

When an Administrator Password is set, it deters unauthorized persons from changing configuration settings. If you are responsible for maintaining the settings of several computers, you might want to set an Administrator Password.

After you set an Administrator Password, a password prompt is displayed each time you try to access the Setup Utility program.

If both the user and administrator passwords are set, you can type either password. However, to change any configuration settings, you must use your administrator password.

Setting, changing, and deleting a password

To set, change, or delete a password, do the following:

Note: A password can be any combination of up to twelve characters (A- Z, a-z, and 0-9). For more information, see “Password considerations” on page 31.

1.Start the Setup Utility program (see Chapter 5, “Using the Setup Utility,” on page 31).

2.From the Setup Utility program menu, select Security.

3.Select Set Passwords. Read the information displayed on the right side of the screen.

Using Security Profile by Device

Security Profile by Device is used to enable or disable user access to the following devices:

IDE controller	When this feature is set to Disable, all devices connected to the
	IDE controller (such as hard disk drives or the CD-ROM drive)
	are disabled and will not be displayed in the system
	configuration.
Diskette Drive Access	When this feature is set to Disable, the diskette drive cannot be
	accessed.

To set Security Profile by Device, do the following:

1.Start the Setup Utility program (see “Starting the Setup Utility program” on page 31).

2.From the Setup Utility program menu, select Security.

32User Guide