Removing and replacing a FRU

Note for sticking a label kit on the base cover

New base cover FRU is shipped with several kinds of label kit. When you replace the base cover, you

need to stick a homologation label which has the same part no. with the label on the old base cover (defective FRU) on the new base cover.

In some models, you also need to stick one or two FCC labels . Check the old base cover and if there is one or two FCC labels on it, find the same one from the label kit and stick it on the new base cover.

Stick the labels on the new base cover as shown in this figure.

152T40/T40p, T41/T41p, T42/T42p

Page 158
Image 158
Lenovo T42/T42P, T41/T41P manual Removing and replacing a FRU