Lenovo T42/T42P, T41/T41P manual Removing and replacing a FRU

Removing and replacing a FRU

Cable routing: When you reassemble the LCD unit, do as follows:

At the left-top corner of the LCD unit, route the antenna cable as in . Do not route the cable over the bracket. To do so, the cable might be pinched between the LCD front bezel and the LCD cover, and the cable or the other parts might be damaged or might not be installed properly.

At the points shown as V, route the cable as it goes under the projections as in . At the points shown as , push the cable into the ditch between the LCD cover and the

bracket by using a screwdriver as in .

a

b

(continued)

b

c

180T40/T40p, T41/T41p, T42/T42p