Lenovo T42/T42P, T41/T41P manual Removing and replacing a FRU

Removing and replacing a FRU

1100 Palm rest or Palm rest with fingerprint sensor (for 14.1-in. LCD models)

For access, remove these FRUs in order:

v“1010 Battery pack for 14.1-in. LCD models” on page 71

v“1040 Hard disk drive” on page 75

v“1060 Keyboard” on page 79

Notes

vIn models with the fingerprint sensor, the sensor has been attached to the palm rest FRU as the child part. In case of the fingerprint sensor has any defects and needs to be replaced, you need to replace the palm rest by following the procedures in this section. The procedures are same both for the palm rest without the fingerprint sensor and for the palm rest with the fingerprint sensor.

vIn models xxU and xxF, this FRU is secured by using a tamper resistant torx head screw (TR7).

(continued)

88T40/T40p, T41/T41p, T42/T42p