Removing and replacing a FRU
1110 Keyboard bezel or Keyboard bezel with fingerprint sensor (for
For access, remove these FRUs in order:
v“1020 Battery pack for
v“1040 Hard disk drive” on page 75
v“1060 Keyboard” on page 79
Note
In models with the fingerprint sensor, the sensor has been attached to the keyboard bezel FRU as the child part. In case of the fingerprint sensor has any defects and needs to be replaced, you need to replace the keyboard bezel by following the procedures in this section. The procedures are same both for the keyboard bezel without the fingerprint sensor and for the keyboard bezel with the fingerprint sensor.
1
1
Step | Icon | Screw (quantity) | Color | Torque |
|
|
|
|
|
| 1 | M2 × 5 mm, | Black | 0.245 Nm |
|
|
|
| (2.5 kgfcm) |
|
|
|
|
|
(continued)