Lenovo X300 manual When installing, v DO NOT work by lifting the LCD panel

Table 31. Removal steps of LCD panel and LCD cable

1

Attention: Unplug the LCD cable with holding the left and right edges of the connector with your fingers, and gently pull the connector toward you. DO NOT unplug it with pulling the cable. Applying tension could cause the cable to be damaged or a wire to be broken, and it might cause the S-driver to be damaged.

When installing:

vPlace the LCD panel on a soft and clean sheet spread on a flat table, and plug the cable by pushing the left and right edges of the connector little by little with your fingers.

vDO NOT work by lifting the LCD panel.

vDO NOT plug the cable with one hand.

2

When installing: When attaching the LCD panel to the cover, press the left and right edges covered with metal gently with your fingers. DO NOT press the surface of the panel or apply any excessive force to the panel.

ThinkPad X300 101