Appendix A. CRU instructions
7Hold the SATA receptacle connector with one hand and pull the hard disk drive (secured in the metal frame) in the direction shown below to detach the connectors e.
e
8Remove the screws and detach the metal frame from the hard disk drive.
9Attach the metal frame to a new hard disk drive and tighten the screws.
0Reconnect the hard disk drive (secured in the metal frame) to the SATA receptacle connector, then carefully reinstall the hard disk drive in the compartment with the tab facing upwards.
AReinstall the frame fixing screws.
BReinstall the compartment cover and tighten the screws.
CReinstall the battery pack.
DTurn the computer over again. Connect the AC adapter and the cables to the computer again.
50
