3Remove the excess disks.
4Connect the power cord to a properly grounded electrical outlet.
5Turn the printer back on.
58 Too many flash options installed
1Turn the printer off.
2Unplug the power cord from the wall outlet.
3Remove the excess flash memory.
4Connect the power cord to a properly grounded outlet.
5Turn the printer back on.
58 Too many trays attached
1Turn the printer off.
2Unplug the power cord from the wall outlet.
3Remove the additional trays.
4Connect the power cord to a properly grounded outlet.
5Turn the printer back on.
61 Remove defective disk
Try one or more of the following:
Remove the defective printer hard disk.
Install a different printer hard disk before performing any op erations that require a printer hard disk.
62 Disk full
Try one or more of the following:
Touch Continue to clear the message and continue processing.
Delete fonts, macros, and other data stored on the p rinter hard disk.
Install a printer hard disk with larger capacity.
80.xx Fuser near life warning
1Order a replacement fuser immediately.
2When print quality is reduced, install the new fuser, following the instruction sheet that came with the replacement
part.
3Touch Continue to clear the message and continue printing.
Troubleshooting 273