Installing a printer hard disk
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.
Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch
something metal on the printer before touching any system board electronic components or connectors.
1Access the system board.
for more information, see “Accessing the system board” on page 36
2Remove the metal bracket from the printer hard disk using a flathead screwdriver.
3Connect the printer hard disk interface cable into the rec eptacle of the ISP board.
4Reattach the system board cover.
Additional printer setup 44