Lexmark Setting up serial printing

3To select the printer that has changed, do either of the following:
•Press and hold the printer, and then select Printer properties.
•Right‑click the printer, and then select Printer properties (Windows 7 or later) or Properties (earlier v ersions).
Note: If there is more than one copy of the printer, then update all of them with the new IP address.
4Click the Ports tab.
5Select the port from the list, and then click Configure Port.
6Type the new IP address in the “Printer Name or IP Address” field.
7Click OK > Close.
For Macintosh users
1Open a Web browser, and then type the printer IP address in the address field.
Notes:
•View the printer IP address on the printer control panel. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2Add the printer.
•For IP printing:
aFrom the Apple menu, navigate to either of the following:
–System Preferences > Print & Scan
–System Preferences > Print & Fax
bClick +.
cClick the IP tab.
dType the printer IP address in the address field, and then click Add.
•For AppleTalk printing:
Notes:
–Make sure AppleTalk is activated on your printer.
–This feature is supported only in Mac OS X version 10.5.
aFrom the Apple menu, navigate to:
System Preferences > Print & Fax
bClick +, and then navigate to:
AppleTalk > select the printer > Add
Setting up serial printing
Use serial printing to print when the computer is far from the printer or to print at a reduced speed.
Additional printer setup 72