Lexmark 2500 Series manual Control options

Understanding Setup mode and menu options 42

Auto LF

Requires a line feed to occur.

•On—A line feed is performed for each Carrier Return (CR) code received.

•Off—A line feed does not occur when a CR code is received.

Note: Off is the factory default setting.

Auto CR

Requires a CR to occur.

•On—A CR is performed for each line feed code received.

•Off—A CR does not occur when a line feed code is received.

Note: Off is the factory default setting.

Zero Slash

•On—The zero (0) prints with a slash down the middle.

•Off—The zero (0) prints without a slash down the middle.

Note: Off is the factory default setting.

Download to NLQ II (available for 2580/2581 models only)

•Enabled—Reserves a portion of the receive buffer for downloading fonts

•Disabled—Uses the entire buffer as a receive buffer

Note: Enabled is the factory default setting.

Download (available for 2590/2591 models only)

•Enabled—Reserves a portion of the receive buffer for downloading fonts

•Disabled—Uses the entire buffer as a receive buffer

Note: Enabled is the factory default setting.

Code Page Sub.

•Enabled—Substitutes code page 858 for 850 to allow older programs access to the European characters

•Disabled—No code page substitution

Note: Disabled is the factory default setting.

Control options

Note: Use Setup mode to configure the printer according to your needs. To print a list of all default settings, press LineFeed from the Main menu.

The following list items outline and explain the Control options and settings you can use with the printer: