Loading paper

21

16Remove slack from the paper, and then lock the right locking lever.

17Open the control panel cover to access layer 2.

18Press Micro , Micro , or LineFeed to move the paper to the TopOfForm you want to use.

Notes:

Use the second form to set TopOfForm alignment.

To do this, align the horizontal lines (located on the platen) with the TopOfForm you want.

19Press Set TOF to set the TopOfForm.

Note: TopOfForm is not saved if the printer is turned off or runs out of paper when using the pull tractor.

20Make sure the printer is online, and the Ready light is on solid. Note: If not, press Start/Stop until the Ready light is on solid.

Bottom loading continuous forms using the pull tractor

Notes:

Make sure the tractor is in the pull position.

Use a furniture type with a paperfeed opening in the middle of it.

Because the printer uses a pull function for bottom loading, it is especially useful for paper that has a tendency to curl, is very heavy, or is very light weight.

Page 21
Image 21
Lexmark 2500 Series manual Bottom loading continuous forms using the pull tractor