To change the scanning resolution to a lower value:
1Click Start Programs or All Programs Lexmark 7300 Series.
2Select All-In-One Center.
3From the Scan area, click See More Scan Settings.
4Click Display Advanced Scan Settings.
5From the Scan Resolution menu, select a lower number.
Scan was not successful1Check the USB cable for any obvious damage.
2Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the USB symbol.
3Firmly plug the square end of the USB cable into the back of the printer.
Turn off and then restart your computer.
If the printer is connected to the computer through another device:
1Disconnect the USB cable from any other device, such as a USB hub or switch box.
2Directly connect the cable to the printer and the computer.
1Uninstall the printer software, and then reinstall it. For more information, see “Removing and reinstalling the
software” on page 100.
2If the software still does not install correctly, visit our Web site at www.lexmark.com to check for the latest
software.
aClick drivers & downloads.
bClick Find Drivers and Downloads.
cSelect your printer family.
dSelect your printer model.
eSelect your operating system.
fSelect the file you want to download, and follow the directions on the computer screen.
Poor scanned image qualityIf an error message is displayed, see “Error messages” on page 94.
If the scanner glass is dirty, gently wipe it with a clean, lint-free cloth dampened with water.
To adjust the quality of a scan:
1Load the document facedown on the scanner glass.
2From the control panel, press Scan Mode.
3Press Quality.
85