Lexmark 7300 Series Can send but not receive faxes, Can receive but not send faxes

3Press or repeatedly until Device Setup appears.
4Press .
5Press or repeatedly until Country Code appears.
6Press .
7Press or repeatedly until the country where you are operating the printer appears.
8Press to save the setting.
If the printer memory is full:
1Dial the receiving number.
2Scan the original document one page at a time.
Can send but not receive faxes
Load paper to print any faxes that have been stored in the printer.
Check the status of the Fax Auto Answer feature.
If the Fax Auto Answer light is on:
•The printer will answer after the preset number of telephone rings.
•If you are using a distinctive ring, see “Setting the distinctive ring” on page 57.
Check the ink levels, and install a new cartridge if necessary.
Check to see whether Fax Forwarding is selected.
1From the control panel, press Fax Mode.
2Press .
3Press or repeatedly until Recv. Setup appears.
4Press .
5Press or repeatedly until Fax Forward appears.
6Press .
7Press or repeatedly to view the current Fax Forwarding setting.
8To turn off Fax Forwarding, press or repeatedly until Off appears.
9Press to save the setting.
Can receive but not send faxes
To make sure the printer is set for faxing, press Fax Mode.
Load the original document facedown in the upper left corner of the scanner glass or faceup in the ADF.
88