Lexmark C54x Series manual Hex Trace, Imaging Kit, Insert Tray, Invalid Engine Code, Load src with

Hex Trace

This message appears between status messages and warnings. Wait for the message to clear.

Imaging Kit

Replace the imaging kit, and then press to clear the message and continue printing.

Insert Tray <x>

Insert the specified tray into the printer.

Invalid Engine Code

The engine code is invalid. Contact Customer Support.

Invalid Network Code

The network code is invalid. Contact Customer Support.

Load <src> with <custom type name>

Try one or more of the following:

•Load the specified paper to clear the message and continue printing.

•Press , and then press to cancel printing.

Load <src> with <x>

Try one or more of the following:

•Load the paper tray or other source with the correct paper type and size.

•Press , and then press to cancel printing.

Load single sheet feeder with <custom type name>

Try one or more of the following:

•Load the manual feeder with the correct paper type and size.

If no paper is in the manual feeder, load a sheet, and then press to clear the message and continue printing.

•Press to clear the message and continue printing.

The printer manually overrides the manual request, and then the job prints from an automatic source.

•Press , and then press to cancel printing.

•Define a name for each custom type (Custom 1–6) using the MarkVision utility. When the printer is prompting for one of the custom types, which has been named, then only the custom name is displayed.

Understanding printer messages

102