Lexmark Wireless Setup Utility stops responding during wireless printer configuration, Printer does not print after wireless configuration completes

Wireless Setup Utility stops responding during
wireless printer configuration
If the Wireless Setup Utilit y stops responding during the wire less configuration proces s, restart the computer. Insert
the Software and Documentation CD and run the Wireless Setup Utility again.
Printer does not print after wireless configuration
completes
These are possible solutions. Try one or more of the following:
MAKE SURE THE PRINTER IS TURNED ON
•Verify that printer is turned on and the power light is lit.
•Verify that the printer is plugged in to a functioning power strip or outlet.
VERIFY THAT THE PRINTER IS READY
•Check the status of the printer and verify that it is ready to print.
•If it is not ready, turn the printer off and then back on again.
DISABLE THIRD-PARTY FIREWALLS
•If a non-Microsoft software firewa ll is installed on the computer, try tempor arily disabling it. Check to see if you
can print with the firewall disabled. Re-enable the firewall and continue to troubleshoot.
•Update any non-Mi crosoft firewall so ftware on the compu ter.
•Add any programs associated with the printer to the firewall whitelist.
VERIFY THAT THE WIRELESS NETWORK IS WORKING PROPERLY
•Try to access other devices on the wireless network to confirm that the network is functioning.
•Contact the system support person to confirm that the network is functioning correctly.
VERIFY THAT THE CORRECT PORT OR PRINTER IS SELECTED
•If you are attempting to print wirelessly, verify that the USB port is not selected.
•If you have more than one instance of the printer installed, verify that the correct printer is selected.
VERIFY THAT WINDOWS IS WORKING PROPERLY
•Try restarting the computer.
•Try installing the printer driver again.
•Try uninstalling, and then reinstalling the printer driver.
Troubleshooting wireless s etup
29