Lexmark Z12 manual Load the print media, Note See page 3 for instructions on loading banner paper

Step 2: Load the print media

Note: See page 3 for instructions on loading banner paper.

1Place the media against the right side of the sheet feeder. Follow these guidelines when loading print media:

Load up to:	Make sure:
100 sheets of plain paper	•	The print side is facing you.
10 envelopes	•	The print side is facing you.
	• The envelopes are loaded vertically against the
		right side of the sheet feeder.
	• The stamp location is in the upper left corner.
10 greeting cards, index	•	The print side is facing you.
cards, or postcards	•	The cards are loaded vertically against the right side of the sheet feeder.
25 transparencies	•	The rough sides of the transparencies are facing you (smooth side down).
25 iron-on transfers	•	You follow the instructions on the packaging to load the iron-on transfers.
20 sheets of banner paper	•	You follow the directions for printing banners on page 3.
100 sheets of custom size	•	The print side is facing you.
paper	•	Your paper size fits within these dimensions:
		- Width: 76 mm to 216 mm (3.0 in. to 8.5 in.)
		- Length: 127 mm to 432 mm (5.0 in. to 17.0 in.)

2Squeeze the tab on the paper guide and slide the paper guide

to the left edge of the media.

Paper alignment marks

Sheet feeder

Paper guide

•

•

2 •• Chapter 1

•