Lexmark Z12 Appendix, Installing printer, software, Using diskettes, Using the CD-ROM, cable

		Appendix
In this section, you can find			3	Insert the software CD.
information about:			4	Click Next or Finish on any
•	Installing printer software			subsequent screens.
•	Uninstalling printer software			The Lexmark Z12 software
•	Printing from DOS			installation screen appears.
•	Warranty		5	Click Install Printer
•	Notices
				Software.
•	Safety		Windows 95/98 - parallel
•	Printer parts
			cable
Installing printer			1	Start Windows.
software			2	Click Cancel on any screens
You can obtain the printer				that appear.

software using:	3 When the desktop appears,
	insert the software CD.

•the compact disc (CD-ROM)

that came with your printer	The Lexmark Z12 software
	installation screen appears.
• the World Wide Web

from the World Wide Web at www.lexmark.com.

1	From Lexmark’s Web site,
	select the appropriate driver	Appendix
	for your operating system.
2	Select Save to Disk.
3	Select a location on your hard
	disk drive.
4	Double-click the executable
	(.exe) file to open it.
	The Win Self-Extractor
	window opens.
5	Follow the set of instructions
	on your screen.

Using diskettes

If your computer does not have a

•diskettes

If your printer software does not install properly, a communications error message appears when you try to print. You may need to uninstall, and then reinstall the printer software. For help, see page 22.

Using the CD-ROM

Follow the set of instructions that corresponds to your operating system and printer cable (parallel or USB):

Windows 98 - USB cable

1Start Windows.

2Click Next when the first screen appears.

4Click Install Printer Software.

Note: If the CD does not run automatically when you insert it:

1From the Start menu, select Run.

2In the command-line text box, type the letter of your CD-ROM drive, followed by :\setup (for example, d:\setup), and then click OK.

Using the World Wide Web

If your computer does not have a CD-ROM drive, you can download the printer software

CD-ROM drive, you can create driver diskettes using a friend’s computer or a computer at your Lexmark dealer that has a CD-ROM drive. You will need at least three blank 3.5 inch diskettes.

To create diskettes of the printer software:

1Insert the software CD into the CD-ROM drive.

If the CD does not run automatically:

a From the Start menu, select Run.

•

•

Appendix ••21

•