3.2.3 UNIT INSTALLATION
1. Remove the shipping screw from the ventilation door. (See Fig. 17)
Figure 17
2. Remove the front gille by pulling it out at the bottom to release it, then lift it up along the unit top front.
(See Fig. 18)
Figure 18
3. Slide the unit into the wall sleeve and secure with 6 screws through the unit flange holes. (See Fig. 19)
Figure 19
4. Reinstall the front grille by hooking the top over the unit top, then pushing it in at the bottom. (See Fig. 20)
Figure 20
