10 206-4185Installer Overview
This is the Commercial Mode Setup Guide only.
Installer Menu / Commercial Mode Setup
To set up a Master TV for cloning purposes, you will need to know how
to enter the TV Installer Menu and make changes to the default values
as required. Similarly, to configure a TV’s Installer Menu settings in FTG
Mode, you will need to know how to access and use the FTG
Configuration Application utilities. If necessary, familiarize yourself with
the Installer Menu and how to make and save changes. Refer to page 14
for information on accessing the Installer Menu in Pass-through Mode.
Pages 15 to 20 describe Installer Menu items in detail. Refer to pages 29
to 37 for information on entering FTG Mode and using the FTG
Configuration Application utilities.
The LG Installer Remote is supplied with and dedicated to operate the
TV. See next page for typical key functions. Some DVD and VCR con-
trols may be available for selected LG DVD/VCR products.
Cloning refers to the process of capturing a Master TV Setup and trans-
ferring it to a Target TV. The Master TV’s clonable features need to be
configured as part of the Commercial Mode Setup. This is a critical step.
If the Master TV’s clonable features—channel icons or labels, digital font
options, etc.—are not set up correctly, the cloned TVs will all have prob-
lems. Pages 23 to 28 provide detailed information on cloning require-
ments and procedures.
Typical Installer Menu
1 2 3
4 5 6
xxLD330H PTC INSTALLER MENU
000 INSTALLER SEQ 000
UPN 000-000-000-000 ASIC 20E7
PTC V1.00.001 CPU V3.06.00
Installing Batteries in Installer
• Open the battery compartment cover on the back side of the remote.
• Install two high-quality alkaline 1.5V AAA batteries. Never mix old
or used batteries with new ones. Install batteries matching correct
polarity as shown (+ with + and - with -).
• Replace the battery compartment cover.