FTG Mode of Operation (Cont.)
Learning an FMA Configuration File from a TV
To ensure that Pro:Idiom decryption is enabled, it is recommended that you create an FMA Configuration file using the FTG Configuration Application as described on page 30. However, if necessary, this option enables you to save (Learn) an FMA Configuration file from an LD330H TV to a USB memory device.
Note: If the LD330H TV is NOT already in FTG Mode, you may need to perform some manual configuration on the TV before you start this procedure (see “Optional Manual Configuration / Setup for a TV” on following page).
1.Plug a USB memory device into the USB IN port on the TV.
2.Press MENU to display the TV setup menus, use the arrow navigation keys to select/highlight either the Option (if TV is in
3.To gain access to the Learn From TV options in the USB Download Menu, key in the password used to enter the Installer Menu (Example: Press
4.Use the Up/Down arrow keys to select Learn From TV (FMA), and then press
ENTER.
5.To identify the file from others, you can use the Up/Down arrow keys to change the last five digits of the filename. Press ENTER when you are ready to initiate Learning.
The TV will show Learning completion progress in a new window. Do NOT remove the USB device until Learning is complete. When Learning is complete, the USB Download Menu will reappear on screen.
6.When you are finished, remove the USB memory device.
Note: It is highly recommended that you open this FMA Configuration file in the FTG Configuration
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)
Teach To TV (FMA)
Learn From TV (TLL)
Learn From TV (FMA)
Return
Enter
Learn From TV (FMA)
Select the file name and press OK to start
| ► |
|
|
|
|
| |
| ► |
|
|
|
|
|
|
| Return | Enter |
|
!Learn From TV
UPDATING...
25%
Do not unplug!
32 |
