3.2 Rear Panel
○ ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | ○ | |
22 | 24 | 26 | 27 | 31 | 32 | 33 | 34 | 31 | 39 |
23 | 25 | 28 | 29 | 30 | 35 | 36 | 37 |
○ | ○ ○ | ○ | ○ | ○ | ○ | ○ 38 |
○
Figure
○22 FREQ STD 10 MHz INPUT connector
Accepts the external reference signal. Apply 10 MHz reference signal when operating this instrument in synchronized with the equipment connected.
○23 FREQ STD 10 MHz OUTPUT connector Synchronizes other equipment.
○24 Serial BER CLOCK signal input connector (BER SERIAL INPUT CLOCK) Used for BER measurement in serial connection.
○25 Serial BER SYNC signal input connector (BER SERIAL INPUT SYNC) Used for BER measurement in serial connection.
*This connector is only used when the "Serial (4 Wire)" is selected on the screen.
○26 Serial BER DATA signal input connector (BER SERIAL INPUT DATA) Used for BER measurement in serial connection.
○27 Serial BER VALID signal input connector (BER SERIAL INPUT VALID) Used for BER measurement in serial connection.
*This connector is only used when the "Serial (4 Wire)" is selected on the screen.
○28 TS clock output connector
Outputs the TS clock to synchronize the external TS input.
○29 TS INPUT
Accepts the external TS signal. Apply the TS in
○30 TS INPUT
Accepts the external TS signal. Apply the TS in