(1)Selecting PN

The random signal (PN23) can be output by setting the Source to PN on the TS Source (L-2) screen.

(2)Selecting ROM Pattern

The pattern stored in the ROM (called ROM pattern) can be selected by setting the Source to ROM on the TS Source (L-2) screen, then press the Pattern (F1) key.

Figure 5-3 ROM pattern selection screen

• Pattern (F3)

Selects the video pattern.

Color Bar

Eight-color full field color bar pattern

Ramp

Full field ramp pattern

Monoscope

Monoscope pattern

•Video Format (F4)

Selects the size of patterns listed above. 1920 x 1080 (16:9)

1280 x 720p (16:9)

704 x 480i (16:9)

704 x 480i (4:3)

•Audio (F5)

Selects the sound pattern.

1 kHz (L, R)Tone signal (1 kHz for both left and right)

400 Hz (L, R)Tone signal (400 Hz for both left and right) 1 kHz (L) + 400 Hz (R) Tone signal (1 kHz for left, 400 Hz for right)

The pattern, pattern size, and sound can arbitrary be combined.

(3)Selecting External <ASI or SPI>

The TS applied to the ASI or SPI connector is used by setting the TS Source to External on the Source (L-2) screen.

5-3