(13) Setting BER measurement interval ...."BI"
Function | Setting and querying BER measurement interval. | |
Syntax | BI_p | (Setting, reply) |
| BI_? | (Query) |
BER measurement interval p: 0.1 to 3600.0 sec.
Effective down to one digit after the decimal point.
＊The value set in second is converted into the number of packets ; it cannot be set in number of packets.
Notes on program code for (8) to (13)When TS input is set other then the PN, both setting and querying operations are disabled.
(14) Setting RF channel............................. | "CH" | |
Function | Setting and querying RF channel (VHF, UHF, CATV). | |
Syntax | CH_n | (Setting, reply) |
| CH_? | (Query) |
n | RF channel | VHF, UHF, CATV channel |
n, | STD | STD setting of USA CATV channel |
n, | IRC | IRC setting of USA CATV channel |
n, | HRC | HRC setting of USA CATV channel |
＊This program code is ignored when querying channel set in frequency.
(15) Setting RF frequency | .........................."RF" | |
Function | Setting and querying RF frequency. | |
Syntax | RF_i | (Setting, reply) |
| RF_? | (Query) |
iRF frequency: 50.000 to 900.000 (MHz), effective down to three digits after decimal point
＊This program code is ignored when querying channel set in channel.
(16) | Incrementing frequency or channel ...."FU" | ||
| Function | Incrementing frequency in current steps when RF is set in frequency. | |
|
| Incrementing channel by one when RF is set in channel. | |
| Syntax | FU | (Setting) |
(17) | Decrementing frequency or channel .."FD" | ||
| Function | Decrementing frequency in current steps when RF is set in frequency. | |
|
| Decrementing channel by one when RF is set in channel. | |
| Syntax | FD | (Setting) |