<<Alarm display on the top screen>>

•The following alarm message is displayed on the top screen. Message is displayed in red.

[FAN]

Indicates cooling fan trouble.

If this alarm is displayed, turn

the

 

instrument power off, then contact your local Leader agent.

 

[TS IN]

Monitors each input signal when SPI/ASI is selected as TS input.

The

 

SPI input in BER measurement mode is also monitored.

 

 

The alarm is displayed in the following status:

 

 

(1)

No signal is input.

 

 

 

(2)

When the signal other than transport stream (MPEG-2 TS) is input.

 

(3)

When five packets or more packets except 0x47 are continuously

 

 

received at the header byte position.

 

[F STD]

Monitors the reference signal.

The alarm is displayed in the following

 

status:

 

 

 

(1)

No signal is applied.

 

 

 

(2)

Input signal frequency exceeds the PLL lock range.

 

 

(3)

Input signal level is lower than the acceptable level range.

 

[OOB]

In case of the LG 3803-01 is incorrectly connected.

 

4-3