LG Electronics 3803 8.11Program Code List

(3)Program message unit separator

Use a semicolon ";" (3Bh in ASCII code) when transfers multiple messages simultaneously.

(4)Program data separator

Use a comma "," (2Ch in ASCII code) to delimit multiple parameters.

8.11Program Code List

Table 8-4 Setting code list

	Header		Data	Description	Unit
1	SY	n	0 to 2	Selecting modulation mode
		n	0 to 5	Selecting TS input
2	TS	p	0 to 2	Type of TS input, or ROM video pattern
		q	0 to 3	ROM screen size
		r	0 to 2	ROM sound pattern
3	CO	n	0 to 1	CN on (1), off (0)
4	CN	i	0.0 to 30.0	Setting C/N value	dB
5	CU			CN value UP
6	CD			CN value DOWN
7	CL	n	0 to 2	Selecting digit of the C/N value to be set
8	BO	n	0 to 1	Setting BER measurement on (1), off (0)
9	BU	ne	0.00E-0 to 9.99E-1	Setting upper limit of BER threshold value
10	BL	ne	0.00E-0 to 9.99E-1	Setting lower limit of BER threshold value
11	BI	p	0.1 to 3600.0	Setting BER measurement interval	0.1 sec
12	CH	n		Setting channel	CH
13	RF	i	50.000 to 900.000	Setting RF frequency	MHz
14	FU			Frequency UP
15	FD			Frequency DOWN
16	DF	n	0 to 5	Selecting digit of the frequency to be set
17	LM	i	-100.0 to 13.0	Setting output level	dBm
18	DU			Output level UP
19	DD			Output level DOWN
20	DL	n	0 to 2	Selecting digit of the output to be set
21	CK	n	0 to 1	Selecting reference signal
22	ST	n	0 to 99	Setting address to store data
23	RC	n	0 to 99	Setting address to recall data
24	RU			Address increment
25	RD			Address decrement
26	RR			Returning to begin address
27	GR	n	0 to 9	Selecting group
		n	0 to 9	Setting begin and end addresses in each
28	GS			group
		p	0 to 98	Setting begin address
		q	1 to 99	Setting end address
29	CW	n	0 to 1	Setting modulation on (1), off (0)

8-5