12 PLASMATV
Installation
Installation OptionsInstallation Options
The set can be installed in different ways such as on a wall, or on a desktop etc.
Install this set only in a location where adequate ventilation is available.

Desktop Pedestal Installation

The set can be mounted on a desk as shown above.

Wall Mount: Horizontal Installation

The set can be installed on a wall as shown above.
(For further information, refer to the optional ‘Wall
Mounting Bracket Installation and Setup Guide’.)

Swivel function (option)

After installing the set, you can adjust the set manually to the left or right direction by 20 degrees to suit your viewing
position.

Note :Before adjusting the angle, you must loosen (to the left) the shaft bolt on the middle of stand’s back. And when

the stand is level with set, you must close (to the right) the shaft bolt to set the hole.

3cm
10cm
10cm
10cm
10cm
To Mount on a Wall
Wall mount minimum allowable clearances for ade-
quate ventilation.
To Install on a Desktop
Pedestal mount minimum allowable clearances for
adequate ventilation.