Installer Menu (Cont.)
096 - DEF. ASP. RATIO (Default Aspect Ratio) Selects default aspect ratio at power up.
•Set to 0 for Set By System.
•Set to 1 for 4:3.
•Set to 2 for 16:9 (default).
•Set to 3 for Just Scan.
•Set to 4 for Zoom.
Note: This item is not available in the Installer Menu unless item 106 ASP RATIO LOCK is set to 0.
097 - AUDIO OUTPUT
Determines availability and signal type/level (fixed speaker, variable speaker, or fixed line level [amplifier]) of the audio output to be used by external audio equipment connected to the Speaker Out jack on the TV. Set to 0 to disable audio output. Otherwise, see the table below and set as required in accordance with audio equipment.
| Value | Status |
|
Speaker Output | 1 | Fixed 0.01 Watts | |
| 2 | Fixed 0.03 Watts | |
|
|
| |
| 3 | Fixed 0.05 Watts | |
|
|
| |
| 4 | Fixed 0.10 Watts | |
| 5 | Fixed 0.20 | Watts |
|
|
|
|
| 6 | Fixed 0.50 | Watts |
| 7 | Fixed 1.00 | Watt (default) |
|
|
| |
| 8 | Control with volume | |
Line Output | 9 | Fixed line level (typically 400 mVrms ± | |
|
| 100 mVrms @10KΩ) output | |
See also Reference section, “External Stereo Speaker Setup.”
098 - PRO:CENTRIC
Selects the Pro:Centric Application Mode. Set to 0 (default) to disable Pro:Centric operation. Set to 1 for Flash Mode. Set to 2 for GEM (Java Application) Mode.
The TV must be turned OFF for a few seconds to initiate the Pro:Centric application download. When it is turned OFF for a second time, the TV will load the Pro:Centric application.
Note: This item is not available in the Installer Menu when item 119 DATA CHANNEL is set to 0.
099 - BACK LIGHTING
Sets the TV screen brightness at power up. Default setting is 255.
•1 - 100 Static Back Lighting
(1 = Dimmest picture, 100 = Brightest picture)
•101 - 200 Dynamic Back Lighting
(101 = Dimmest picture, 200 = Brightest picture)
If set between 101 and 200, the TV automatically controls back lighting depending upon the picture level of the current program. If set to 255, back lighting is controlled via the Picture settings in the TV’s setup menus.
102 - ATSC BAND
Sets up TV to receive different types of incoming signals:
0 = Broadcast, 1 = CATV, 2 = HRC, 3 = IRC, 4 = Same as NTSC.
103 - ATSC TUNE MODE
Sets ATSC tuning mode: Default set to 1 for Physical Channel scan. Set to 0 for Virtual Channel scan.
104 - START MINOR CHANNEL
Sets Minor Start Channel number at power up. 0 = NTSC. If not 0, number selected is the digital channel’s Minor Start Channel number.
Note: This item is not available in the Installer Menu when item 004 STRT CHANNEL is set to 0 or 255.
106 - ASP RATIO LOCK (Aspect Ratio Lock)
Set to 1 to retain previous aspect ratio with power off. Set to 0 to retain default aspect ratio with power off. See item 096 DEF. ASP. RATIO above.
116 - VIDEO MUTE EN (Video Mute Enable)
Set to 0 for Normal. Set to 1 for Blank.
117 - FACT DEFAULT (Factory Default)
Set to 0 for normal. Set to 1 to restore the factory default settings of all Installer Menu items. The restoring of factory defaults will also
Caution: If set to 1, this will restore the factory defaults and clear the channel lineup, including any assigned channel icons and custom text labels.
Note: See also Reference section, “Restoring Factory Defaults on the TV(s),” for further information.
23 |