Channel Icons / Custom Text Labels (2-5-4 + MENU Mode)

Changing Channel Icons and/or Adding or Editing Custom Text Labels in the Channel-Time Display

If there is no pre-assigned icon for a channel, you can add a custom text label of up to seven (7) characters to help identify the channel or network. Also, if desired, a custom text label can be added to the Channel-Time display in addition to a pre-assigned icon. You may also add text labels for the Aux input sources to clearly identify the devices that are connected to the Aux inputs.

 

 

(Icon)

XYZ

XYZ

XYZ

NETWORK

1 2 3 4 5 6 7 (Custom Text Label)

Changing icons and/or adding or editing custom text labels can only be done if there are channels that have been transferred to the TV’s PTC either during the Express Script/Custom Master TV Setup (see pages 10 to 14 or pages 25 to 28, respectively) or by cloning (USB memory device / .tll file or clone programmer only).

Note: A blank letter space is available between “Z” and “!”.

To perform channel editing/labeling:

1.Use the Installer Remote to access the TV Installer Menu (see “Accessing the Installer Menu” on page 15 for further information).

2.Press 2-5-4+ MENU on the Installer Remote to access the Channel Label Editing Menu.

3.Change channel icons and/or add or edit custom text labels as described in the procedures below. (You can do this more than once.)

4.To exit the menu when you are done, press MENU.

Changing a Channel’s Icon on the Master TV

1.Use Channel Up/Down to select the desired channel.

2.Use the Left/Right arrow keys to select the thin letter “I” on the Channel-Time display.

3.Use the Up/Down arrow keys to select the icon with which you want to identify the channel. (If you know the icon number, enter the number, and press OK.)

4.Proceed to add/edit custom text labels, or go to the next channel.

Adding/Editing Channel Labels on the Master TV

1.Use Channel Up/Down to select the desired channel.

2.Press the Left or Right arrow repeatedly until the numbers 1 to 7 appear on the display. The number shows the position of the character that can be changed. Number 1 is the first character, number 2 the second character, etc.

3.Use the Up/Down arrow keys to select the desired character.

4.Proceed to the next number posi- tion, or go to the next channel.

Adding/Editing Source Labels on the Master TV

1.Press BANK to select the desired Aux input source: AV1, RGB, HDMI1, HDMI2, or HDMI3.

2.Press the Left or Right arrow repeatedly until the numbers 0 to 9 appear on the display. The number shows the position of the character that can be changed.

3.Use the Up/Down arrow keys to select the desired character.

4.Press BANK for the next Aux input, or use Channel Up/Down to return to channels.

Installer Remote Control Key Functions for Master TV Channel Label Editing Menu

•Channel Up/Down: Tunes to the next channel in scan.

•Left/Right Arrows: Select the item to change. If “I” is shown, the icon can be changed. If a number is shown, it indicates the position of the character that can be changed.

•Up/Down Arrows: Select the icon or the character to be

displayed. Tip: Arrows can be held down for fast scrolling.

•0 – 9: Use to enter the index number of the icon, if known.

•OK: Changes the icon after the icon number has been entered.

•BANK: Use to select Aux inputs.

•MENU: Exits the editing process.

206-4245

29