USB Cloning Procedures (Cont.)
Learning / Teaching a Master TV Setup using a USB Memory Device / .tll File
USB Cloning Notes
•Read the IMPORTANT CLONING INFORMATION on page 34 before beginning any cloning procedures.
•You may edit a filename as part of the Learning procedure; however, a file with edited contents will not be recognized.
•It is not possible to clone a Master TV’s clock using a USB memory device. Either set a Target TV’s clock manually or use the Auto Clock setting in the TV setup menus.
Learn Setup from Master TV
1.Ensure the Master TV is set up completely and in
2.Insert the USB memory device into the USB IN port on the Master TV.
3.Press MENU on the Installer Remote to display the TV setup menus, use the arrow navigation keys to select/highlight the Option menu icon, and then press the number “7” key a total of seven times to display the USB Download Menu.
4.To gain access to the “Learn From TV” option in the USB Download Menu, key in the password used to access the Installer Menu (Example: Press
5.Use the Up/Down arrow keys to select Learn From TV (TLL), and then press OK.
6.To differentiate this .tll file from others, you can use the Up/Down arrow keys to change the last five digits of the filename. Press OK when you are ready to initiate Learning.
Learning status will be shown on a progress bar in a new window. When the Learning process is complete, the USB Download Menu will reappear on the screen.
7.When Learning is done, press CC on the Installer Remote to exit the USB Download Menu, and remove the USB memory device from the Master TV.
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)
Teach To TV (TLX)
Learn From TV (TLL)
Learn From TV (TLX)
CC /
Previous
OK
Learn From TV (TLL)
Select the file name and press OK to start
| ► |
|
|
|
|
|
|
|
|
| |
| ► |
|
|
|
| ||
CC / Previous | OK | ||
!Learn From TV
UPDATING...
25%
Do not remove the USB from the port!
Do not unplug!
37 |