12 206-4214
Automated Installation Routine Wizard (Cont.)
Auto Configuration
Processing Pro:Centric Configuration.
Step 2 may take up to 15 min(s).
Please wait...
Step 1 Detecting the type of Pro:Centric network
Step 2 Locating the Pro:Centric Server
Step 3 Determining the Pro:Centric mode
Step 4 Downloading the application files
Step 5 Downloading the maintenance files
Step 6 Saving the Pro:Centric configuration
Warning - Do not remove AC power or the signal cables during these steps
10%
RF
In Progress
:
:
:
:
:
:
Prev.
Use the Up/Down arrow keys on the Installer Remote to select/
highlight Pro:Centric Auto from the Automated Installation
Routine Wizard Welcome screen. Then, press OK.
The Pro:Centric Auto Conguration will proceed with a series of
automated steps to congure the TV for Pro:Centric operation
and to download the Pro:Centric application and E-Z Installation
data. The Auto Conguration screen (see example at right)
shows overall progress, as well as the progress and/or values
for each of the individual installation steps. Note that some steps
may require up to 15 minutes.
When the Pro:Centric Auto Conguration is complete, the wizard
exits, and the TV will turn OFF.
Pro:Centric Auto Conguration
When selected, this option enables the TV to use a search algorithm to automatically determine
the type of Pro:Centric network, the (RF) Data Channel, and the Pro:Centric Application Mode.
The TV then looks for the Pro:Centric application and maintenance (E-Z Installation) les to
download.
Note: If the Pro:Centric server conguration is IP or if you intend to use the Pro:Centric server for
remote management only of TV E-Z Installation (splash screen, configuration, and/or firmware)
data downloads, use the “Pro:Centric Manual” option described below.
Pro:Centric Manual Conguration
If the Pro:Centric server conguration is RF, and you already know the settings (i.e., Data Channel
and Pro:Centric Application Mode) that need to be congured in order for the TV to connect to the
Pro:Centric server, you may streamline the setup process by entering this data manually. Also, if
the Pro:Centric server conguration is IP or if the Pro:Centric server is to be used solely for remote
management of E-Z Installation data downloads, this procedure enables you to specify the appro-
priate settings.
1. Use the Up/Down arrow keys on the Installer Remote to select/highlight Pro:Centric Manual
from the Automated Installation Routine Wizard Welcome screen. Then, press OK.
In the rst Manual Conguration Screen (see examples on following page), you will be able to
congure the appropriate Pro:Centric settings. Use the Up/Down arrow keys on the Installer
Remote to navigate between elds.
Note: Select the “Back” button from the Manual Conguration screen or press the key on the
Installer Remote, if desired, to return to the Welcome screen.
2. In the Pro:Centric Mode eld, use the Left/Right arrow keys to select the appropriate
Pro:Centric Application Mode—GEM, FLASH, HTML, or Conguration Only.
Note: For remote management only, select the Pro:Centric Mode “Conguration Only”
option to only search for TV E-Z Installation data downloads. Pro:Centric application data will
not be downloaded.
3. Refer to the appropriate subsection on the next page, depending on the Pro:Centric server
conguration, to complete the remaining elds.
(Continued on next page)