LG Electronics 42PA450C, 60PA6500, 60PA5500 English, Check that the LED indicator on the dongle

PENTOUCH 37

	Pairing for the First Time		Touch pen Operation
1	Check that the LED indicator on the dongle	Once paired, you can use the touch pen in the
		following ways.
	connected to the computer is red.
2	Keep the touch pen within 30 cm (12 inches)	1 Powering on
			- Press the (POWER) button once. The red
	of the dongle.
			and green LEDs will remain lit to indicate that
3	Press the (POWER) button on the touch pen		the power is on.
	once.		Powering off
4	The LED indicator on the touch pen will red		- Press the (POWER) button for more than 3
			seconds and release it. The red LED will blink
	for 2 seconds and blinks green 3 times when
			3 times and the pen will be turned off.
	pairing is complete.
		2 Pressing the Touch Home button while using
5	If the LED indicator is red for 4 - 5 seconds and
			the touch pen
	blinks red 3 times, pairing is not successful.		- In the Pentouch program: Shows or hides
	Please try pairing again.
			the toolbar of the feature.
6	Once a pen is paired, the red LED blinks once		- In Windows: Works in the same way as the
	when you press the Touch Home button.		right-click function.
			Point the touch pen at an object you want to
			right-click, then press the button.
	When Pairing Fails
		3 The double-click function may not work as
1	Pairing fails if the dongle driver is not installed
			intended in Windows XP or Windows Vista.
	on the computer.		If this is the case, use the Touch Home button
2	Pairing fails if the LED indicator on the dongle		(right-click) instead.
	is not red.	4 The touch pen works in the same way as a
3	Remove the dongle from the PC, reinsert it		mouse in Windows.
	and try pairing.

Unpairing (Resetting the touch pen)

1Press the Touch Home button on the touch pen and check that the red LED blinks once.

2Press the Touch Home button and the

(POWER)

button together, regardless of sequence, for more than 4 seconds.

3If you release the buttons after 4 seconds, the pen will be reset. The red LED will blink three times and the pen will be turned off.

Caution When Unpairing

1Be careful not to unpair the pen by mistake. If unpaired, try pairing it again.

2If you unpair and pair a normally functioning touch pen, the other paired pen may not work. In this case, unpair the nonfunctioning touch pen and pair it again by following the steps described in the Pairing for the First Time section.

ENGLISH