LG Electronics 50PA550C, 60PA6500, 60PA5500 English, click in Window XP or Vista, on your PC, go

ENGLISH

40 PENTOUCH

NOTE	yyIf you want to open programs with a single
	click in Window XP or Vista, on your PC, go
yyThe method of changing display resolution
	to Start → Control Panel → Folder Options
settings may vary according to the	and select “Single-click to open an item (point
computer’s configuration.
	to select)”.
yyPentouch does not support dual monitor
	yyIf your PC is running Windows XP, the virtual
mode or duplicate (mirror) monitor mode.	keyboard will only support English.
Check that the PC screen is set to only be	yyWhen changing to the Pentouch mode, or
displayed on the TV.	when changing the resolution in Pentouch
yyThe switch screen key of the laptop may be	mode for RGB input signals, images may not
subject to change by the manufacturer.	be displayed properly for a while due to auto
	adjustment.
	yyMake sure that there are not many metal
CAUTION	obstacles between a pen and dongle.
yyThe double-click function may not work as	Otherwise, the function may not work
	properly.
intended in Windows XP and Vista because
	yyThe Pentouch function may not work
these operating systems do not use touch
	normally where the TV screen is too bright
drivers.
	due to light from another light source.
yyThe Pentouch operation may become slow
depending on the computer’s performance.
yyThe screen size may change if you discon-
nect the computer’s output port and connect
it again. If this happens, set the computer
resolution again.
yyIf nothing is shown on the TV and the laptop
screen when you press the switch screen
key (Fn + manufacturer-specified key), try
pressing the key again.
yyThe TV screen size may become smaller
when you press the switch screen key (Fn +
manufacturer-specified key). If this happens,
adjust the resolution again.
yyChanging the desktop icon properties in Win-
dows 7 may affect the Pentouch program.
yyIt is recommended not to run other applica-
tions while using the Pentouch program.
yyIf the point you touch on the TV screen us-
ing the touch pen and the point indicated
as touched on the computer screen do not
match when the computer and TV are con-
nected by a PC signal (RGB) cable, use the
TV remote control to select [SETTINGS] →
[Picture] → [Screen] (RGB-PC), then select
[Auto Config.] to adjust the screen.
yyIf the PC and TV are only connected by a PC
(RGB) signal cable, there will be no sound
from the TV. Please connect the PC and the
TV with a PC audio cable as well.
yyThe Play Video function in Photo Editor may
not work as intended, depending on the
codecs installed on your computer.
yyEraser function could be slower if drawing
objects are overlapped exceed program
performance depends on PC environment.