Installation and SetupHDMI connection
If you have a HDMI TV or monitor, you can connect it
to this player using a HDMI cable.
1. Connect the HDMI OUT jack on the player to the
HDMI jack on a HDMI compatible TV or monitor
2. Set the TV’s source to HDMI (refer to TV’s Owner’s
3. In stop mode, select HDMI mode by pressing
HDMI on the front panel.
Lights green when the HDMI is turned on.
Press RESOLUTION repeatedly to select the
resolution you wish to change to then press PLAY.
The DVD disc must not be playing in order to set
•No sound will be output from HDMI cable if the
AUDIO setup is not set to PCM.
•The arrow on the cable connector body should face
up for correct alignment with the connector on the
•When you use HDMI, the other connections (Yellow
VIDEO OUT, S-Video and Component Video (YPb
Pr)) will not work.
•If there is noise or lines on the screen, please
check the HDMI cable.
When you use HDMI connection, you can change the
resolution (480p, 720p, 1080i) for the HDMI output by
pressing RESOLUTION on the front panel.
480i is not available. You can only change the
resolution within your TV’s and Monitor’s resolution
-For S-VIDEO OUT connection, black and white
scramble signal will appear if you select an
HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection for
use with DVD Players, Set-Top Boxes, and other AV
HDMI was developed to provide the technologies of
HDCP (High Definition Contents Protection). HDCPis
used to protect digital content transmitted and
HDMI has the capability to support standard,
enhanced, or high-definition video plus standard to
multi-channel surround-sound audio, HDMI features
include uncompressed digital video, a bandwidth of up
to 5 gigabytes per second, one connector (instead of
several cables and connectors), and communication
between the AV source and AV devices such as
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
HDMI compatible TV
Rear of DVD player