4.BASIC FUNCTIONS
4.5.1 Screened Transfer
When the called station answers, inform the transfer.
1)Press END ( 
) button to complete the transfer.
4.5.2 Unscreened Transfer
When the called station begins to ring,
1)Press END ( ) button to complete the transfer after ring back tone is heard. Then, a
message is displayed on the LCD of the called station. If the call is not answered within 30 seconds, recall ring is ringing at both stations. At this time, press TALK ( ) button then a user will be connected with the transferred call again.
4.5.3 Answering Screened Transfer
A user will hear intercom ring.
1)Answer intercom call and receive transfer notice. If the transferring party hangs up, the outside call will be connected.
4.5.4 Executive/Secretary Transfer
1)If a station is designated as an Executive station and the station is busy or in DND (Do Not Disturb), all calls will go to its Secretary station.
2)If a station is designated as a Secretary station, it may signal its Executive station which is in DND by using the Call Wait feature.
4.6 Placing a CO Call on Hold
While you use a wireless terminal through CO line, you can use this function when you want to let the outside caller wait for a moment.
1)Talk →
(Press longer than 1second)
While connected to a CO call (not intercom call),
2) Press HOLD ( 
) button longer than 1 second for exclusive hold. (Dial tone will be heard) A message is displayed on the LCD as shown, and the hold music is heard to the outside caller. You have two kinds of choice, one is to retrieve a call and the other is to make another call.
4.6.1 To retrieve the call
1) Press HOLD ( | ) button longer than 1 second, then the held outside call will be |
connected. |
|
4.6.2 To make another call
1)Press END ( 
) button if you want to make another intercom or CO call.
2)The wireless terminal goes to an idle state.
3)Press TALK ( 
) button again to make a call.
30
