LG Electronics GT360 manual Using flight mode, Using power save, Resetting your phone

When SIM changed or Immediately.

Change codes - Change your Security code, PIN1 code or PIN2 code.

Using flight mode

Use this function to switch the flight mode On or Off. You will not be able to make calls, connect to the internet, send messages when Flight mode is switched On.

Using power save

Choose to switch the power saving settings Always on, Night only or Off.

Resetting your phone

Use Reset in phone settings to reset all the settings to the factory definitions. You need the security code to activate this function.

Viewing memory status

Your GT360 has three memories available: the phone, the SIM card and an external memory card (you may need to purchase the memory card separately).

You can use the memory manager to determine how each memory is used and see how much space is available.

Press Menu and select Settings. Choose
Memory status and you will then see the		01
current status of the memories Common,
		02
Reserved, SIM card and External
memory in your GT360.		03
	TIP! See Installing a memory card for
		04
	more information.
Changing your Bluetooth		05
settings		06
1	Press Menu , Connectivity, then	07
	choose Bluetooth.
2	Choose Bluetooth settings. Make	08
	your changes to:
My visibility - Choose whether to
Show or Hide your device to others.
My name - Enter a name for your
GT360.
My address - View your Bluetooth
address.
Changing your connectivity
settings
Your connectivity settings have already		SETTINGS
from the off. If you want to change any
been set up by your network operator,

so you can enjoy your new phone

settings, use this menu.

53