
Settings
Audio & Ringtones
There are 5 sound modes: General, Vibrate All, Alarm Only, and Silent All. Preferences can be set in the Audio & Ringtones menu. In addition, pressing and holding the key while on the standby screen switches between Normal mode and Vibrating mode. Ear Mic is available when respective instruments are attached.
Shop Tones
Connects to the AT&T Ringtone store.
Ringtone
]Sounds: Shows and plays ring tones. You can select your preferred Ringtone.
]Volume: This menu controls Ringtone sound volume.
]Alert Type: Supports 3 ring alert types. Ring, Ring and Vibration and Ring after Vibration.
]Increasing Ringtone: Allows you to select an Increasing Ringtone type which is played when you receive an incoming call. You can select to turn this On or Off.
nNote
Full length music tracks cannot be set as either ringtones or message tones.
Message Tone
]Sounds: Allows you to access and play your message tones. These can be downloaded ringtones from Ringtone shops.
]Volume: This menu controls Message Tone sound volume.
]Alert Type: Supports 4 message alert
types: Silent, Vibrate, Ring Only and Ring & Vibrate.
]Alert Interval: Support 5 message alert
types: Once, Every 2 Min, Every 5 Min, Every 10 Min and Every 15 Min.
74