LG Electronics HCS6320 setup guide Display a List of Transcoder Cards Installed in the Chassis

Configuration Options via Command Line (Cont.)

Display a List of Transcoder Cards Installed in the Chassis

1.Access the HCS6320 Main Menu as described on page 30.

2.At the [Main] Command > prompt, type list and press Enter.

The display identifies the type of transcoder cards installed and their serial numbers, for example:

Available cards:

Card	1: [HCS7720] [001-12080017]
Card	2: [HCS7720] [001-12080018]
Card	3: [-]
Card	4: [HCS7720] [001-12080019]
Card	5: [HCS7720] [001-12080020]
Card	6: [-]
Card	7: [-]
Card	8: [HCS7720] [001-12080021]
Card	9: [HCS7720] [001-12020006]

Card 10: [-]

Card 11: [HCS7720] [001-12080023]

Card 12: [HCS7720] [001-12080024]

Access Individual Transcoder Menus

See “Transcoder Menu Commands” on pages 39 to 42 for detailed information on transcoder configuration options.

Perform an External Card Reset

1.Access the HCS6320 Main Menu as described on page 30.

2.At the [Main] Command > prompt, type xrst and press Enter.

3. At the Enter card number (1-12, ‘ctr’, or ‘all’) > prompt, either:

•Type the slot number of the card and press Enter to reset a single transcoder card.

•Type all and press Enter to reset each of the transcoder cards.

•Type ctr and press Enter to reset the HCS6320.

f you opt to reset one or more of the transcoder cards, the system will display confirmation before initiating the reset of the selected card(s), for example:

Resetting card 5:

If you opt to reset the HCS6320, the system will initiate the reset immediately without further confirmation.

32 206-4183