LG Electronics HCS6320 setup guide Card HWID# is, Encoder version, OS version, Application version

Configuration Options via Command Line (Cont.)

View Hardware Information for the Selected Transcoder

At the [HCS7720 (#)] Command > prompt, type hwid and press Enter to view the selected card’s hardware ID (firmware version), for example:

Card HWID# is: 7720-v1.1-2011-1026

View Software Information for the Selected Transcoder

At the [HCS7720 (#)] Command > prompt, type ver and press Enter to view the selected card’s software versions, for example:

OS version:	HCS7720-943-2011-1025
Encoder version:	1.2
Application version:	2.5

View MUX Bitrate Data for the Selected Transcoder

At the [HCS7720 (#)] Command > prompt, type bits and press Enter.

MUX bitrate data for the selected transcoder card is displayed in millions of bits per second (Mbit/s), for example:

HDMI Input Bitrate 6.684 Mbit/s (raw 6.684 Mbit/s)

Ethernet Input Bitrate: 3.826 Mbit/s (raw 3.838 Mbit/s)

Data Output Bitrate: 4.127 Mbit/s

Total Output Bitrate: 19.390 Mbit/s

Refer to the Installation & Setup Guide for HCS7720 transcoder cards for further information on bitrate data.

Install a Pro:Idiom Key on the Selected Transcoder

This command installs the Pro:Idiom encryption key on the selected transcoder card. To install a Pro:Idiom key on all the transcoders, see “Install a Pro:Idiom Key on All Transcoders” on page 33.

Caution: Do NOT initiate simultaneous menu sessions while a Pro:Idiom key installation is in progress. Doing so will interfere with the active processes and may corrupt the system configuration and/or cause the HCS6320 card to cease normal operation.

Note: In order for a Pro:Idiom encrypted channel to be displayed, the receiver must contain a Pro:Idiom decrypter, and the receiver must be configured to allow decryption of the desired channel.

(Continued on next page)

40 206-4183