LG Electronics HCS6320 Satellite Receiver Menu Commands, Access the Satellite Receiver Menu

Configuration Options via Command Line (Cont.)

Satellite Receiver Menu Commands

The following subsections describe how to access and use the Satellite Receiver Menu commands.

Access the Satellite Receiver Menu

1.Access the card menu for the selected transcoder (see “Access the Transcoder Menu” on page 39).

2.At the [HCS7720 (#)] Command > prompt, type stb and press Enter.

3. At the [Satellite (#)] Command > prompt, either:

•Press Enter to display the Satellite Receiver Menu (see example below).

•Type the desired command and press Enter.

Note: You can always press Enter at the Command > prompt to display the Satellite Receiver Menu.

Example: Satellite Receiver Menu

-----------------------

Satellite Receiver Menu

-----------------------

getch	Read Current STB Channel
setch	Set STB Channel
sglvl	Read Satellite Signal Strength
lksts	Read Satellite Lock Status
bnum	Read STB Serial Number
cnum	Read Smart Card Number
on.	Turn STB On
off	Turn STB Off (Standby)
stbrst	Reset Satellite STB
getupd	Read STB Update Parameters
setupd	Set STB Update Parameters
model	Read STB Model
ver	Read STB Software Version
ret	Return to Card Menu

[Satellite (#)] Command >

where:

#is the chassis card/slot number you selected for configuration purposes.

206-4183 43