Turning the handset on/off

Turning your handset on

Ensure that your USIM card is in your handset and the battery is charged. Press and

hold until the power comes on. Enter the USIM PIN code that was supplied with your USIM card if the PIN code request is set to On. (Note: Please refer to page 75)

After a few seconds you will be registered on the network.

Turning your handset off

Press and hold until the power goes off. There may be a few seconds delay while the handset powers down.

Do not turn the handset on again during this time.

Access codes

You can use the access codes described in this section to avoid unauthorised use of your phone. The access codes (except the PUK and PUK2 codes) can be changed by using the Change codes feature [Menu #.1.5.3].

PIN code (4 to 8 digits)

The PIN (Personal Identification Number) code protects your USIM card against unauthorised use. The PIN code is usually supplied with the USIM card. When the PIN code request is set to On, your phone will request the PIN code every time it is switched on. When the PIN code request is set to Off, your phone connects to the network directly without the PIN code.

PIN2 code (4 to 8 digits)

The PIN2 code, supplied with some USIM cards, is required to access functions such as Fixed dial number. These functions are only available if supported by your USIM card.

Getting Started

21

Page 21
Image 21
LG Electronics KU970 manual Turning the handset on/off, Access codes, PIN code 4 to 8 digits