Installation
4. SECURE THE GUIDE PANELS
Extend the guide panels (TYPE F) to fill the window opening using 4 screws (TYPE B) to secure them, as shown in Figure. 11.
5.INSTALL THE SASH SEAL AND SASH LOCK
a.Cut the sash seal (TYPE E) to the window width. Stuff the sash seal between the glass and the window to prevent air and insects from getting into the room, as shown in Figure. 11.
b.Fasten the L bracket using a (TYPE A) screw, as shown in Figure. 11.
6.Window installation of room air conditioner is now completed. See ELECTRICAL DATA for attaching power cord to electrical outlet.
NOTICE REMOVAL FROM WINDOW
Trun the air conditioner off, disconnect the power cord, remove the L bracket and the screws installed through the top and bottom of the guide panels, and save for reinstalla- tion later. Close the guide panels. keeping a firm grip on the air conditioner, raise the sash, and carefully tilt the air conditioner backward, draining any condensate water. Lift the air conditioner from the window ad remove the sash seal from between the win- dows.
LBracket
Type A 
Sash Seal
(Type F)
Type B
Figure 11
Service Manual 11
