44BEFORE REQUESTING SERVICE

Symptoms and Questions

Possible Cause/Solution

Too much smoke during the self clean cycle.

Too much soil in the oven. Open the windows to get rid of the

 

smoke from the room. Press the

 

 

 

 

or

 

 

 

key. Wait until

 

the mlight goes off before trying to open the oven door. Wipe up

 

the excess soil and reset the clean cycle.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The oven door does not open after a self clean cycle.

The oven temperature is too high. Wait up to one hour to cool

 

down.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The oven door is not clean after a self clean cycle.

yy Incorrect oven control settings. See “SELF CLEAN” in the Care

 

and Cleaning section.

 

 

 

 

 

 

 

 

 

 

 

 

 

yy The oven was heavily soiled. Clean up heavy spills before begin-

 

ning the self clean cycle. Heavily soiled ovens may need either a

 

longer self clean or two self clean cycles.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“CLOSE DOOR TO CONTINUE BROILING” or “DOOR

Close the oven door.

 

 

 

 

 

 

 

 

 

 

 

 

OPENED” appears in the display.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

"DOOR LOCKED" message appears when you want to

The oven door is locked because the temperature inside of the

cook.

oven is too high. Press the

 

 

or

key.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Oven control beeps and displays an F error code.

yy Press the

 

or

 

 

key and wait for one hour.

 

yy Check the

main

gas

shut-off valve or the oven gas shut-off valve

 

and call for service.

 

 

 

 

 

 

 

 

 

 

 

 

 

yy Remove the power from the range for five minutes and then

 

reconnect the power. If the function error code repeats, call for

 

service.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The oven racks were cleaned in a self clean cycle.

Apply a small amount of vegetable oil to a paper towel and wipe

 

the edges of the oven racks. Do not use lubricant sprays.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clock is flashing.

Power outage or surge. Reset the clock. If the oven was in use,

 

you must reset it by pressing the

 

 

 

 

or

 

 

 

key. Reset the

 

clock and any cooking function.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“Burning” or “oily” odor emitting from the vent.

This is normal in a new oven. To speed the process, set a self

 

clean cycle for a minimum of three hours. See “SELF CLEAN” in

 

the Care and Cleaning section.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Strong odor.

An odor from the insulation around the inside of the oven is normal

 

for the first few times the oven is used.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fan noise

The convection fan may turn on and off automatically.

 

This is normal.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Convection fan not working.

The preheating temperature has not been reached. The Fan will

 

start automatically once the preheating temperature is reached.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Burners are not lighting properly after cleaning the cooktop

Make sure that the burner heads and caps are completely dry and

surface.

properly positioned.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 44
Image 44
LG Electronics LDG3017ST owner manual Key and wait for one hour