REMOVING AND REPLACING COMPONENTS (CONT.)
To replace Glide‘N’Serve
1
•To remove, pull the drawer out to full extension.
•Lift the front of the drawer up, then pull it straight out.
•To install, slightly tilt up the front and insert the drawer into the frame and push it back into place.
wCAUTION
•Pinch hazard! Keep hands and feet clear of the bottom of the door when opening and closing.
Ice Bin
Drawer
wWARNING
Child Entrapment Hazard
•When the divider of the freezer drawer is removed, children may crawl inside.
DuraBase ® Divider
To separate the ice bin, pull out the drawer to full extension. Gently lift and pull out the ice bin.
To reinstall, simply set the ice bin in its correct position.
26
The DuraBase divider organizes the DuraBase area into sections. Pull the divider upward in a straight motion to remove it. To reinstall it, hook the top corners of the divider over the top edge of the DuraBase.
