LEVELING THE REFRIGERATOR DOORS (CONT.)
DOOR ALIGNMENT
1If the space between your doors is uneven, follow the instructions below to align the doors:
•With one hand, lift up the door you want to raise at middle hinge.
•With other hand, use pliers to insert snap ring as shown.
•Insert additional snap rings until the doors are aligned.
(Three snap rings are provided with the refrigerator.)
STARTING
Before loading your refrigerator with fresh foods:
•Remove tape and any temporary labels from your refrigerator before using. To remove any remaining adhesive residue, rub the area briskly with your thumb, or rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue.
NOTE: Do not remove any
•Thoroughly clean your refrigerator and wipe off all dust that may have accumulated during shipping.
•Install accessories such as the ice cube bin, drawers, and shelves, in their proper places. They are packed together to prevent possible damage during shipment.
•Adjust the desired temperature for the refrigerator and freezer (see Adjusting the Temperature and Functions).
•Let your refrigerator run for at least 2 or 3 hours before putting food in it. Check the flow of cold air in the freezer compartment to ensure proper cooling. Your refrigerator is now ready for use.
18
