LG Electronics LHY-518 To Add or Erase Channels from Memory, Auto Clock Set, Manual Clock Set

Before Operation (Continued)

To Add or Erase Channels from Memory

This feature allows you to add to or erase channels from memory manually.

1	Follow steps 1-3 as shown above to the
	previous page (Auto Channel Set).
2	Use v / V to select the CH. Add/Del option.
3	Press B to move to the third level.
	“Edit” icon is highlighted.
4	Press ENTER.
	The Channel Edit menu appears.
			Add
		Ch. 2
			Delete
		0-9 Input	Close
	Use v / V or number buttons to select a channel
5 to add or delete then press B.
	“Add” or “Delete” icon is highlighted.
6 Press ENTER to confirm your setting.
7	Repeat steps 5-6 to add or erase additional
	channels.

8 Press SETUP or RETURN to exit the menu.

Auto Clock Set

The Recorder Combi Receiver gives you two ways to set the time and date: the Auto Clock Feature or manually. The Auto Clock Feature enables the Recorder Combi Receiver to set up the clock when the Recorder Combi Receiver is turned off.

The Clock Set feature is set to Auto at the factory. In the “Auto” setting, the Recorder Combi Receiver looks for a channel carrying XDS (Extended Data Services) infor- mation. XDS updates the clock using the Coordinated Universal Time.

		Tuning Band
		Auto Channel Set
		CH. Add/Del
		Clock Set	Auto
		TV Aspect	Manual
		Progressive Scan	Time Zone
		Power Save Mode		Auto
			Daylight
		Factory Setting		Auto
			Savings
		Prev.	Select	Close
1	Press SETUP.
	The Setup menu appears.

2 Use v / V to select the GENERAL menu.

3 While the GENERAL menu is selected, press B to move to the second level.

4 Use v / V to select the “Clock Set” option.

5 Press B to move to the third level.

6 Use v / V to select the “Auto” option then press

ENTER.

The Auto option is set at the factory. In the Auto option, the Recorder Combi Receiver looks for a channel carrying XDS (Extended Data Services) information. XDS updates the clock using the Coordinated Universal Time.

7 Use v / V to choose your “Time Zone”. You can set your local Time Zone manually. When Timezone is set to Auto, the Recorder Combi Receiver will use XDS information to determine the proper setting.

8 Use B to choose the “Daylight Savings” option. Use v / V to choose Auto, On, or Off.

You can turn Daylight Savings On or Off manually. When it is set to Auto, the Recorder Combi Receiver will use XDS information to determine the proper setting.

9 Press ENTER to confirm your setting, then press SETUP to exit the Setup menu.

ote

If your local TV station does not send date and time informa- tion, or sends incorrect information, you can set the clock man- ually.

Manual Clock Set

1	Follow steps 1-5 as shown above to the left
	(Auto Clock Set).
	Use v / V to select the “Manual” option then
2 press ENTER.
		Tuning Band
		Auto Channel Set
		CH. Add/Del
		Clock Set	Auto
		TV Aspect	Manual
		Progressive Scan	Year
		Power Save Mode			2005
			Date		1	/	1
		Factory Setting	Time			:
				12			00	AM

OK

3 Enter the necessary information for date and time.

b/ B (left/right): Moves the cursor to the previous or next column.

v / V (up/down): Changes the setting at the current cursor position.

4 Press ENTER to confirm your setting, then press SETUP to exit the Setup menu.

HOOKUP

27